LEARN HOW TO THROW ON THE WHEEL
On this 2 hour workshop we will cover how to center your clay, open and pull the walls up to shape your lump of clay into a functional pot.
By the end of the workshop we will clean up and choose the glaze I will apply at a later stage.
WHAT HAPPENS AFTER THE WORKSHOP?
Pots that have been made on the wheel need to be trimmed by me next day when the clay is at leather hard stage. After this your work will be dryed
DRYING
All work must be dried slowly to avoid cracking of the clay, this process is dependent on size and thickness of work, it may take up to two weeks.
FIRST FIRING- bisque
Once the work is completely dry, I will load it in the kiln and run a firing cycle at 1000 degrees, the cycle takes up to 48 hours, once the kiln has cooled down, I will remove the work which will be ready for glaze application.
APPLYING THE GLAZE:
Once the work is bisque fired, I will apply the glaze you have chosen by following the instructions on the form
SECOND FIRING - GLAZE CYCLE
Once the pieces are coated in glaze, I will load the kiln and run a glaze cycle at 1222 degrees Celsius.
During the cycle the glaze will melt on the work, the clay will vitrify and turning the pieces into ceramics. All the pieces will be dishwasher, microwave and food safe.
The cycle can take up to 48 hours and the kiln cannot be opened unless it has cooled down.
REQUIREMENTS FOR ALL WORKSHOPS AND CLASSES:
I kindly ask all participants to:
Extra charges:
Firing charge for your work is £10 payable by cash or card on the day
Terms and Conditions
To book your space please WhatsApp or Email me and i will guide you through the booking process.